lost tray selection ability

[Paul]

Up near the top of the PPD file, there should be some lines referencing a cupsFilter.  can you copy those out here please?
> Hi Paul
>
> Nothing in the error log. If I print a test page it goes to tray 1 even though the ppd specifically says tray 3.
>
> JayArr
>
>
> > If you print a test page does it honor the PPD?
> > anything in the error_log (1.4 logs a little different i've noticed, you may want to kick logging to debug)
> >
> > > I'm building a new print server with CUPS 1.4, the old one was 1.3. I have an HPIIID printer with an envelope feeder and two trays. I use the top try for general printing, it has white paper 8.5X11. I have our company cheques loaded into try two (lower) for the accounting software.
> > >
> > > I create a series of printers all aimed at the same socket.
> > >
> > > Simplex uses tray 1 and does not duplex the sheet. (faster single sheet feed)
> > >
> > > Duplex uses tray 1 and duplexes the sheet
> > >
> > > Cheques "should" use tray 2. (only for the accounting software.)
> > >
> > > Envelope "should" use the #10 envelope feeder and does not duplex.
> > >
> > > The trouble is that since upgrading to CUPS 1.4 this is now broken. All printing comes from the top tray no matter what is specified in the ppd file.
> > >
> > > I'm still using the same albeit updated HP Laserjet Series PCL 4/5 driver and the application/vnd.cups-raster 50 rastertohp filter.
> > >
> > > All ideas would be appreciated.
> > >
> > > JayArr
> > >
> > >
> > >
> > >
> >
>