[cups.general] Bad device-uri scheme

[Laszlo Papp]

At any rate, here is my error log. It tells me about nothing what can be wrong.

Best Regards,
Laszlo Papp

On Tue, Jun 14, 2011 at 7:57 PM, Laszlo Papp <lpapp at kde.org> wrote:
> Hi,
>
>> You can try:
>> DEVICE_URI=lpd://host-or-ip/queue /usr/lib/cups/backend/lpd 123 user title 1
>> "" filename
>
> That command worked just fine and I got the "/etc/hosts" file printed
> out. Hence what is wrong with this command then: "lpadmin -p security
> -v lpd://172.21.36.88/ps -E && lp -d security /etc/hosts"
>
> This is the output of the working command you sent me:
> DEVICE_URI=lpd://172.21.36.88/ps /usr/lib/cups/backend/lpd 123 user
> title 1 "" /etc/hosts
> STATE: +connecting-to-device
> DEBUG: Looking up "172.21.36.88"...
> DEBUG: Connecting to 172.21.36.88:515 for printer ps
> INFO: Connecting to printer...
> STATE: -connecting-to-device
> INFO: Connected to printer...
> DEBUG: Connected to 172.21.36.88:515 (IPv4) (local port 1023)...
> DEBUG2: hrDeviceDesc="Xerox WorkCentre Pro 238, v1 Multifunction System"
> DEBUG2: prtGeneralCurrentLocalization=1
> DEBUG2: prtLocalizationCharacterSet=106
> DEBUG2: prtMarkerSuppliesColorantIndex.1.1 = 1
> DEBUG2: prtMarkerSuppliesColorantIndex.1.2 = 1
> DEBUG2: prtMarkerSuppliesColorantIndex.1.3 = 1
> DEBUG2: prtMarkerSuppliesColorantIndex.1.4 = 1
> DEBUG2: prtMarkerSuppliesType.1.1 = 3
> DEBUG2: prtMarkerSuppliesType.1.2 = 20
> DEBUG2: prtMarkerSuppliesType.1.3 = 15
> DEBUG2: prtMarkerSuppliesType.1.4 = 4
> DEBUG2: prtMarkerSuppliesDescription.1.1 = "Toner Bottle CRU"
> DEBUG2: prtMarkerSuppliesDescription.1.2 = "Xerographic CRU Module"
> DEBUG2: prtMarkerSuppliesDescription.1.3 = "Fuser CRU Module"
> DEBUG2: prtMarkerSuppliesDescription.1.4 = "Waste Toner Bottle CRU"
> DEBUG2: prtMarkerSuppliesMaxCapacity.1.1 = 11880
> DEBUG2: prtMarkerSuppliesMaxCapacity.1.2 = 222000
> DEBUG2: prtMarkerSuppliesMaxCapacity.1.3 = 422000
> DEBUG2: prtMarkerSuppliesMaxCapacity.1.4 = -2
> DEBUG2: prtMarkerSuppliesLevel.1.1 = 2970
> DEBUG2: prtMarkerSuppliesLevel.1.2 = 131876
> DEBUG2: prtMarkerSuppliesLevel.1.3 = 389203
> DEBUG2: prtMarkerSuppliesLevel.1.4 = -3
> DEBUG2: prtMarkerColorantValue.1.1 = "black"
> ATTR: marker-colors=#000000,#000000,#000000,#000000
> ATTR: marker-names="Toner Bottle CRU","Xerographic CRU Module","Fuser
> CRU Module","Waste Toner Bottle CRU"
> ATTR: marker-types=toner,transferUnit,fuser,wasteToner
> ATTR: marker-levels=25,59,92,-1
> STATE: -media-low-report
> STATE: +media-empty-warning
> STATE: -toner-low-report
> STATE: -toner-empty-warning
> STATE: -door-open-report
> STATE: -media-jam-warning
> STATE: -input-tray-missing-warning
> STATE: -output-tray-missing-warning
> STATE: -marker-supply-missing-warning
> STATE: -output-area-almost-full-report
> STATE: -output-area-full-warning
> DEBUG: lpd_command 02 ps
> DEBUG: Sending command string (4 bytes)...
> DEBUG: Reading command status...
> DEBUG: lpd_command returning 0
> DEBUG: Control file is:
> HRM696
> Puser
> Jtitle
> ldfA521RM696
> UdfA521RM696
> Ntitle
> DEBUG: lpd_command 02 53 cfA521RM696
> DEBUG: Sending command string (16 bytes)...
> DEBUG: Reading command status...
> DEBUG: lpd_command returning 0
> INFO: Sending control file (53 bytes)
> INFO: Control file sent successfully
> DEBUG: lpd_command 03 26 dfA521RM696
> DEBUG: Sending command string (16 bytes)...
> DEBUG: Reading command status...
> DEBUG: lpd_command returning 0
> INFO: Sending data file (26 bytes)
> INFO: Spooling LPR job, 0% complete...
> INFO: Data file sent successfully
> DEBUG2: prtMarkerSuppliesLevel.1.1 = 2970
> DEBUG2: prtMarkerSuppliesLevel.1.2 = 131876
> DEBUG2: prtMarkerSuppliesLevel.1.3 = 389203
> DEBUG2: prtMarkerSuppliesLevel.1.4 = -3
> ATTR: marker-levels=25,59,92,-1
> PAGE: 1 1
> helloworld:~#
>
> Best Regards,
> Laszlo Papp
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: error_log
Type: application/octet-stream
Size: 53142 bytes
Desc: not available
URL: <https://lists.cups.org/pipermail/cups/attachments/20110615/7a899e23/attachment-0001.obj>