[cups.general] CUPS 1.1.22 + BJC-2000

[Till Kamppeter]

Johannes Meixner wrote:
> Hello,
> 
> On Nov 15 12:09 Richard Hirner wrote (shortened):
> 
>>Canon BJC-2000
>>Everything I print is scaled to about 1/2 width and 1/2 height
>>and placed in the left top corner of the sheet.
> 
> 
> Normally this indicates a resolution problem.
> 
> Play around with the resolution settings (there may be two kind
> of resolutions: "Ghostscript Resolution" and "Quality").
> 
> As far as I know some Canon printers require 600 dpi (or 720 dpi).
> If they get only 300 dpi (or 360 dpi) data then all the data is
> used for the first half of width and height.
> Therefore it may work to use a driver for 600 dpi or 720 dpi.
> 
> 
> Regards
> Johannes Meixner

Johannes, do you know exactly which models do not support 300 dpi, one 
should exclude the 300 dpi for them in both Foomatic (for the old GS 
drivers) and Gimp-Print.

Or should I make all 600-dpi-capable Canons use 600 dpi as default, so 
that most users do not perceive that 300 dpi does not work?

    Till