[cups] Lexmark Prospect s200-500 do not work over WiFi

[Jörg Thümmler]

Am 03.09.22 um 20:36 schrieb Sławomir Lach:
> I try to configure my printer to working over WiFI.
> 
> I use official Lexmark Drivers and OpenSUSE Tumbleweed. Na matter if I load
> usblp or not - printer was detected only on usb cable. I must use the same
> cable type to configure printer to work over WiFI, but when I try to do that,
> GUI do not told me printer is detected. I cannot click next after connecting
> cable, when request.
> 
> This is output after connecting usb cable and configure to work printer over
> network:
> 
> StdOut:
> 0
> 
> StdErr:
> DEBUG: Loading USB quirks from "/usr/share/cups/usb".
> DEBUG: Loaded 182 quirks.
> DEBUG: list_devices
> DEBUG: libusb_get_device_list=18
> DEBUG2: iSerialNumber="3064888DM03059M"
> DEBUG2: Printer found with device ID: MFG:Lexmark;CMD:CPDNPA004;MODEL:Pro200-
> S500 Series;CLASS:Printer;DES:Lexmark Pro200-S500 Series; Device URI: usb://
> Lexmark/Pro200-S500%20Series?serial=3064888DM03059M&interface=1
> 
> I edit file /usr/share/cups/usb/org.cups.usb-quirks and disables lines after
> each line containing Lexmark string. I restart cups in next step. This does
> not help.
> 
> Any suggestion?
> 
> 
> _______________________________________________
> cups mailing list
> cups at cups.org
> https://lists.cups.org/mailman/listinfo/cups

Hi,

do you see the printer in your wifi network? You need a wifi config 
including dhcp to get an IP for the printer... You should be able to 
ping it at this IP, otherwise IMHO printing on it over wifi cannot work.

Your output just shows the normal usb configuration, no network...

In most cases there is an "connect"-Button at the printer to initiate / 
reset the wifi connection, you tried this? Is there any display at the 
printer showing the wifi connection status, maybe you have to allow wifi 
in the printers setup first, as it may be off by default...

-- 
cu

jth